- Information
- Reviews
Waxed Gel-Coat With Catalyst
A polyester surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. All Fiber-Tek gelcoats are isophthalic resin based and are a brushing viscosity. Requires M.E.K.P catalyst for curing.
The table below contains the catalyst chart when using MEKP to catalyze Polyester Resins & Gelcoats. The MEKP Catalyst must be used or the resin or gelcoat will not cure.
| Catalyst Volume | 25°C | 20°C | 15°C | 10°C |
|---|---|---|---|---|
| 10 ml per litre or 10 drops per oz. | 30 min. | 2 hr. | 4 hr. | --- |
| 15 ml per litre or 15 drops per oz. | --- | 30 min. | 2 hr. | 4 hr. |
| 20 ml per litre or 20 drops per oz. | --- | --- | 40 min. | 2 hr. |
NOTE: Working time is approximately 25% of above cure times. Avoid working in extreme temperature or direct sunlight.
Related products
Solarez Polyester Ding Repair 1.0 oz Tube
C$16.99
A mixture of clear, non-yellowing, high strength, fiber reinforced polyester resin and an amazing solar activated catalyst. No mixing required and gels in 30 seconds, curing in 3 minutes - but ONLY when exposed to sunlight.
Polyester Resin Catalyst 60ml
C$9.95
Methyl Ethyl Ketone Peroxide is an organic peroxide needed to initiate the cure of polyester resins and gelcoats.