Pumps

If you have multiple ballast bags, you'll need to purchase additional adapters for each bag to make them compatible with Ronix's PNP Pump. Adapters include the main pump connector to thread into the bag, and a cap to plug the connector when not in use.

The quick release connector has a hose barb fitting on one side and a 90 degree lockable female end on the other that will connect directly to the Fly High Flow-Rite Quick Release Connect.

Replacement O-Ring Gasket for the 5" NRS Barrel Pump.

Use lithium grease to re-lubricate the gasket.

Two of the nozzles work well for the type of valves found in some air mattresses.
The 5/8" diameter tip on the third nozzle fits some types of boat valves.
These nozzles also work with the Wonder Pump 6 Hand Pump.

The Boston valve is the industry-standard for all recreational towable tubes. One-way Air flow allows easy inflation with low-risk for deflation. Super-fast deflation as the valve unscrews from insert.

One of the Boston valves is sure to fit the thread pattern of your inflatable, no matter what brand.
The Boston valves have a square base, which is much easier to turn than a round base, especially with wet hands.

Replacement hose for Red Paddle Co. Titan II Pump

Broke your hose? We've got you covered. 

The eight adapters fit a wide range of inflatable valves.

Connect two pumps to one board for faster inflation and have more time for paddling. Save time and energy by boosting an electric pump so boards can reach correct pressure in record time.

Best For: Inflating (2) kayak chambers

O'Brien Lightning Valve Replacement Cap.
Comes with washer.
This cap will work on most current O’Brien tubes that use the new green lightning valve system.

SPECS

• DC 12V
• 3 standard nozzles
• Seven feet of wire cord
• Inflates up to 1.2 PSI