- Information
- Reviews
DETAILS:
Replacement Check Valve for the NRS Barrel Pump.
FEATURES:
- Note:The threaded end on the check valve in your Barrel Pump is glued to the outside Corner Hose Adapter that the pump hose attaches to. You will also need to purchase a new adapter. The Round Corner Hose Adapter (# 80093.01) is for pumps made prior to 2010, and the Square Corner Hose Adapter (# 80094.01) is for newer pumps.
- To replace the check valve, use a hacksaw to saw through the Corner Hose Adapter, as close to the pump body as possible. Use a flat blade screwdriver or chisel and a hammer to break off the remainder of the hose adapter. This will allow you to remove the check valve.
- When installing the new check valve and corner hose adapter we recommend coating the threads of the check valve with PVC cement to prevent it from unscrewing with use.
- If you have questions about the procedure, call 877.677.4327 and ask to speak to one of our Repair Department pros.
Related products
Leafield A6 Pressure Relief Valve Cap
C$5.95
Use this cap to plug your Leafield PR valve in emergency cases. If the PR valve fails and allows your floor to deflate too much, temporarily plug it with this cap.
NRS Pressure Gauge Adapter For Leafield Valve
C$8.95
The NRS Pressure Gauge Valve Adapter attaches to both the NRS Mechanical Pressure Gauge and Digital Pressure Gauge. It fits snugly in all Leafield valves and military valves.
Leafield Recessed Valve Boot
C$30.95
Replacement for the Leafield A7 Recessed Valve Boot. The A7 Valve was used in older Avons, RIB inflatables and dinghys before the introduction of the B7 and C7 Leafield Valves.
NRS Mechanical Pressure Gauge
C$20.95
The NRS Mechanical Pressure Gauge helps you minimize the risk when inflating your boat and monitoring air pressure. This simple tool can save you a ton of headache and expense.